CEILING MEDALLION “SUNSHINE ILLUSION” 30 IN. (CCMF-036)

Home/Ceiling Medallions/CEILING MEDALLION “SUNSHINE ILLUSION” 30 IN. (CCMF-036)

CEILING MEDALLION “SUNSHINE ILLUSION” 30 IN. (CCMF-036)

$299.00

Rated 5.00 out of 5 based on 4 customer ratings
(4 customer reviews)

Diameter: 30 in.
Finish: Antique Bronze, Olympic Gold, Antique Copper
Inside Diameter: 4 in.
Fits Canopies Up To: 6-1/2 in.

Bulk Product Offers

Min BuyMax BuyOffer
10 Items 49 Items5 % Discount
50 Items 99 Items10 % Discount
100 Items - 15 % Discount
SKU: CCMF-036 Category: Tags: ,

Description

  • This ceiling medallion is fully hand painted by a professional artist.
  • Finished in metallic colors to match chandeliers, lights fixture and ceiling fans.
  • Can be used for interior and exterior settings. Can also be washed.
  • This medallion is made of polyurethane that last forever.
  • Made in U.S.A.
  • Lifetime Warranty

Shipping Lead Time

As this is a custom hand painted product, please allow 7 to 10 business days for shipping.

Delivery Lead Time Per Quantities:

Please be advised that this is a hand painted job and is very time consuming, see time per quantities below.

  • 1 – 10 Medallions: 7 – 10 days.
  • 10 – 50 Medallions: 15 – 21 days.
  • 100 + Medallions: 1 – 2 Months.

Exterior Settings

If exterior setting is chosen, a sealer coat should be applied for protection and durability, $10.00 will be added to the price.

Finish Sheen

You can choose from two different finish sheen, low luster, which is the default sheen and semi-gloss, an extra finish coat should be applied to obtain a glossy sheen, $10.00 will be added to the price for this service.

Center Hole Drilling

Some of our ceiling medallions come with no center hole from factory, we offer the service of drilling the hole for free (please be advise that item can not be returned), Just measure your electric box or installation place and choose center hole size for your medallion on product options, we will cut it for you.

How To Fit The Canopy In Your New Medallion

In most of the ceiling medallions, the design close to the center area allows to place a canopy wider than the inside diameter that comes from factory, That’s the maximum diameter that a canopy can fit (view product specifications), a small design area around the center hole might be covered but you save the canopy (recommended). Other option is to replace your canopy for a smaller one that fits the inside diameter (only if your canopy is bigger than the maximum diameter that a canopy can fit).

Manufacturer Explanation About The Product

  • Modeled after original historical patterns and designs.
  • Solid urethane for maximum durability and detail.
  • Lightweight for quick and easy installation.
  • Can be cut, drilled, glued, or screwed.
  • Can be used on the interior or exterior settings.

Additional information

Weight 9 lbs
Dimensions 32 x 32 x 5 in
Product Name:

"Sunshine Illusion"

Style:

Flagstone

Diameter:

30 in.

Finish:

Antique Bronze, Olympic Gold, Antique Copper

Material:

Polyurethane

Inside Diameter:

4 in.

Fits Canopies Up To:

6-1/2 in.

Projection:

2-3/4 in.

Product Weight:

5.8 lb.

Installation Guide

How To Install A Ceiling Medallion

 

Important: If your Ceiling Medallion comes with no hole from factory, it should be cut prior installation, just choose the appropiate diameter of the hole you need to cut according your electric box size and the canopy of your ceiling fan or light fixture, also check the medallion specifications (center hole diameter and maximum that a canopy can fit) provided in the product page tabs. You can use a regular hole saw tool available in any local store to cut the medallion.

 

Tools & Materials Needed

 

·  Caulking gun.

·  Elastomeric adhesive caulk.

·  Sponge or clean cloth.

·  Putty knife.

·  Extra fine sandpaper.

·  Hammer & finishing nails (Nails must be long enough to penetrate the substrate at least 1/2″).

·  Jigsaw, keyhole saw, or pen‐knife.

 

Prior to Installation

 

·  Clean installation surface and back of medallion of all dirt and dust with a clean cloth or sponge.

·  Make sure that the surface and the back of the medallion are completely dry before attempting installation.

·  Measure and mark the location where the medallion is going to be installed.

 

Important Safety Instructions

 

·  Make sure to use the correct tools recommended.

·  Wear safety goggles.

·  Follow fixture, power tools, and paint manufacturers’ instructions and users manuals.

·  Use common sense and follow good construction practices.

·  Medallions are not load‐bearing. Do not use them to support electrical fixtures or ceiling fans.

 

IMPORTANT NOTE When Installation of Medallions With a Light Fixture or Ceiling Fan

 

·  Turn the power off at the breaker before installation.

·  Medallions are solely decorative. Do not use medallions to support the light fixture or fan.

·  Do not use the fixture or fixture canopy to support the medallion.

·  Make sure you are installing the light fixture or ceiling fan according to the manufacturer’s guidelines. If their installation guidelines conflict with our medallion installation instructions, be sure to contact us immediately.

·  To ensure all electrical codes are met, make sure to consult with a licensed electrician.

 

Installation Process (1) Permanent Medallion Installation With a Light Fixture or Ceiling Fan

 

Disconnect and remove current fixture before installing the medallion (if a current fixture is already installed).

Measure the fixture canopy. Drill/cut a hole in the center of the medallion that is no larger than the canopy size (this is the hole that the electrical will go through).

Lay the medallion face down on a soft surface that will not scratch/dent the medallion detail.

Apply a 1/2″ bead of adhesive caulk all the way around the back edge of the medallion.

Feed the electrical wiring through the medallion’s center hole and gently press the medallion up against the ceiling.

When pressing the medallion up against the ceiling, some adhesive caulk will seep out. Smooth excess caulk around the medallion with a finger or the putty knife and apply extra caulk that is needed to fill in any gaps.

Wipe off any excess adhesive caulk with a sponge or damp rag.

Larger medallions will need to be installed with nails in addition to the adhesive.
Note: If you would like to remove the nails after the adhesive sets, leave at least 1/2″ of the nail sticking out from the medallion, so you can easily pull it out.

Fill any nail holes with caulk and smooth the surface with a finger or the putty knife. If any excess caulk is left, let it dry, and then lightly sand it down with extra fine sand paper.

Re‐connect the ceiling fixture or ceiling fan following the manufacturer’s guidelines.

Slide fixture canopy up to medallion and tighten. Make sure it fits snugly against the medallion.

Touch up the medallion with any paint that is needed.

 

Installation Process (2) Removable Medallion Installation With a Light Fixture or Ceiling Fan

 

(This process allows for easy removal of the medallion for electrical wiring access)

Follow steps 1 and 2 from “Permanent Medallion Installation”

Feed the electrical wiring through the medallion’s center hole.

Install using finishing nails.

Countersink nails using nail set and fill any holes with caulking. Smooth the caulk with your finger or putty knife. Once the caulk is dry, lightly sand it smooth if needed.

OPTIONAL: Apply latex caulk around the edge of the medallion, blending the medallion into the ceiling (this will make removal slightly more difficult).

Re‐connect the light fixture or fan according the manufacturer’s guidelines.

Slide fixture canopy up to medallion and tighten. Make sure it fits snugly against the medallion.

Touch up the medallion with any paint that is needed.

 

Installation Process (3) Medallion Installation Without a Light Fixture or Ceiling Fan

 

Lay the medallion face down on a soft surface that will not scratch/dent the medallion detail.

Apply a 1/2″ bead of adhesive caulk all the way around the back edge of the medallion.

Gently press the medallion up against the ceiling or wall.

When pressing the medallion up against the ceiling or wall, some adhesive caulk will seep out. Smooth excess caulk around the medallion with a finger or the putty knife and apply extra caulk that is needed to fill in any gaps.

Wipe off any excess adhesive caulk with a sponge or damp rag.

Larger medallions will need to be installed with nails in addition to the adhesive.
Note: If you would like to remove the nails after the adhesive sets, leave at least 1/2″ of the nail sticking out from the medallion, so you can easily pull it out.

Fill any nail holes with caulk and smooth the surface with a finger or the putty knife. If any excess caulk is left, let it dry, and then lightly sand it down with extra fine sand paper.

Touch up the medallion with any paint that is needed.

Return Policy

If you are not satisfied with your purchased ceiling medallion you may return it within 30 days of your purchase date. We don’t charge for restocking fees, however we cannot cover your return shipping cost, ceiling medallions boxes are subject to expensive shipping cost charged by carriers due to it’s sizes. If you are not sure about purchasing this product, we recommend you to buy a sample in crown moldings sample page, for you to view our finishes quality in person, this will help to avoid unnecessary returns. Medallions with center hole drilled by choice are non-returnable.

4 reviews for CEILING MEDALLION “SUNSHINE ILLUSION” 30 IN. (CCMF-036)

  1. Rated 5 out of 5

    Eusebio Roman

    Gorgeous Medallion!

    This medallion sure is a piece of art. I purchased this one and two others from the same vendor (Fine Art Deco) and am extremely satisfied with them. All 3 of them are gorgeous!!! They were packaged/shipped in strong carton boxes with plenty of foam (peanuts) protection, not like other medallions I purchased from other Internet vendors. I highly recommend these medallions.

  2. Rated 5 out of 5

    Jennifer Burgelin

    Beautiful!

    I love this medallion. I was worried about purchasing online and what it would look like, but it’s beautiful and very eye-catching. It goes perfectly with our dining room chandelier.

  3. Rated 5 out of 5

    JR Moxley

    This medallion is gorgeous. Unfortunately we chose it for a ceiling fan but it will not work out for us so we will need to exchange it for a flat medallion. I’m pretty sure the website said this one could be used with ceiling fans, but perhaps just not the model we have. Also, the package arrived sooner than expected.

  4. Rated 5 out of 5

    Sven Reiter

    We purchased this product from the Home Depot site but was able to talk to the gentleman of the company that paints and sells this medallion. We were told the medallion could take up to two weeks to arrive,and our electrician was scheduled to be at our home in five days. The gentleman took my order, painted it,and over nighted it the following day! We got it and it looks incredible! I would use this company again and again. Thank you! Sven

Add a review

You may also like…