Questions? Call us at: 877-268-7770 / 954-343-DECO (3326)

Ceiling Tile Grid & Seam Faux Tin Cover CTGSCFF-002

Ceiling Tile Grid & Seam Faux Tin Cover CTGSCFF-002

$42.95

Measurements: 24 in. x 1 in.
Finish: Antique Brass, Antique Copper, Antique Gold, Antique Silver, Brass, Copper, Cream Pearl, Gold, Silver, White Matte, White Pearl.
Material: PVC.
Pack: 24 pieces per pack.

-

Description

  • Peel and stick.
  • 24″ x 1″.
  • Will work with 15/16 grid.
  • Can be used over seams with faux tin glue up ceiling tiles.

Important: not compactible with DCT01, DCT02, DCT03, DCT04, DCT 05, DCT 06, DCT26, DCT304 models as the colors are not the same.

Additional information

Weight 1 lbs
Dimensions 25 × 1.5 × 5 in
Finish:

Antique Brass, Antique Copper, Antique Gold, Antique Silver, Brass, Copper, Cream Pearl, Gold, Silver, White Matte, White Pearl

Length:

24 in.

Width:

1 in.

Special Instructions:

One pack for 10 2'x2' tiles. One pack for 6 2'x4' tiles., 24 pieces per pack

How to Install Faux Tin Glue Up Ceiling Tiles

 

Product Information

Material: Rigid PVC.
Size: 2′ x 2′ (foot) (4 Square feet)
Thickness: 0.37 mm
Designs: 40
Color: Any Plain Color Shade.
Effects: Wooden Grains effects, Metallic, Pearl, Velvet etc.

Installation Instructions

Application: To decorate Ceiling or walls

If you want to add your special touch our products, we welcome your suggestions /requirements. Customization is possible on all these specifications.

Just follow these four simple steps to install our 24″ x 24″ overlapping edge decorative ceiling system. It is really quick and easy to glue up faux-tin ceiling tiles.

  1. Prepare the surface: Wipe off the ceiling / surface and make it smooth and even. Remove loose plaster, paint, wall paper etc.
  2. Draw an angle: draw straight lines in the corner (in width and length part) and make a 90 degree angle, for starting point of pasting.
  3. Apply the adhesive. Apply any good-quality contact cement, rubber- or urethane-based adhesive only, on the edges and raised crossed section of the sheet, and let it dry until the solvent of adhesive evaporates for a perfect start to a faux-tin ceiling tiles glue-up job. We recommend that all customers always test the application and allow it to rest at least 24 hours to evaluate the process and results and to make an informed decision as to whether the application is right for your particular home or commercial scenario. We also recommend a clean, dry surface and to buy and use a premium-quality, brush-grade, neoprene-based contact cement that meets the stringent requirements of the professional user. High-strength and initial grab make it ideal for most decorative projects. Fast-drying formula dries in 15-20 minutes and exhibits high heat and water resistance when dry. We suggest Wellwood by Dap Inc.
  4. Place and press:Place the sheet into the required position (first sheet at the 90-degree point) and press firmly but gently. Overlap the ends of the previous sheet, again using firm but gentle pressure. The advantage of the decorative ceiling system in 24″ x 24″ with overlapping edges is that it provides you with an extra and unique edge for your PVC ceiling panels decoration due to multiple designs available in all colors.
  • Long-lasting and durable
  • Widest range to choose from
  • Partly replaceable
  • Decorative and colorable (Any good-quality paint)
  • No fungus and termite effects
  • Convenient size (2′ x 2′)
  • Washable (with mild detergent)
  • Weatherproof
  • Waterproof
  • Lightweight and dust-proof
  • Recyclable
  • Dimensionally stable
  • Easy, quick, and inexpensive to fix
  • Non-flammable static (will not create static electricity, as other plastic does)
  • Ideal for any ceiling in any weather condition

The PVC decorative ceiling systems have dominated the market for the past 15 years. They are manufactured from high-quality polyvinyl chloride sheets and are embossed to create three-dimensional effects. Artwork is created with various colors and effects. The combination of the above results in an extraordinary, incomparable appearance.

The PVC systems are available in the size of 24″x 24″ and are available in 40+ beautiful designs in almost any color or shade. A combination of two or more colors is also available. You may enjoy wood-like effects that resemble real wood grain, metallic (gold, silver, copper, etc.), pearl shine, etc., all of which create stylish and unrivaled beauty. When considering how to install decorative ceiling tiles, home owners are free to imagine any degree of beauty desired because of the simplicity of installation.

The PVC can be fixed on any hard, plain surface with any good-quality rubber-based adhesive. They can be used in homes, offices, hospitals, schools, hotels, motels, business complexes, etc. Their quality and economical value are exceptional. Inquires about how to install faux-tin ceiling tiles in any particular location can be answered by our knowledgeable staff.

All of the designs are available in a variety of colors in our online shop!

Installation Instructions For Overlapping Edges

 

  • The PVC ceiling tiles can be installed on any hard and plain surface, and faux-tin ceiling tiles’ glue-up can be easy.
  • The tiles can be cut with scissors for required fitting size.
  • To install the tiles on the T-bar system or suspending grids, first, create a false ceiling structure on the T-bar system using plywood, MDF, block board, etc., then simply paste the tiles on the false ceiling.
  • The ceiling tiles are washable and colorable.

How to Install Faux Tin Drop in Ceiling Tiles

Faux tin drop in ceiling tiles can be used on an existing grid system without the need to remove the existing tiles. They are a convenient option for anyone that wants to transform their ceiling without using adhesives to make this possible. In addition to this, they can be easily removed from the existing tiles if you decide to recapture the old look you once had. They can be used on any size ceiling and are easy to handle by DIY individuals. In the video you will see a quick presentation of how these tiles are installed onto an existing tile system.

Tools and Materials Needed

 

  1. Faux Tin Drop in Ceiling Tiles (model 210)
  2. Stepladder
  3. Measuring Tape
  4. Adhesive (if preferred)
  5. Moldings (if preferred)

 

Suggested Material Stores

Lowes

Decorative Ceiling Tiles

Home Depot

Walmart

Preliminary Steps

 

  • Determine how many faux tin drop in ceiling tiles you will need by calculating the area you intend to cover up. You can easily count the number of existing tiles and use this as a basis for your calculation. When you do decide to buy the tiles, try to buy more than what you calculated to ensure you have enough for any future.
  • If the lines of the grid system do not have the same color as the tile you intend to install, then you will need to paint it. This is to ensure that you have the right color balance. You can easily repaint the lines in the future if you decide to remove the tiles and install other models.
  • Remove at least one of the tiles and use the measuring tape to get the length and width of the tile. This information is very important, so you must ensure that the dimensions are accurate. If possible, ask the supplier to send a sample tile to test under your existing tile system.
  • The tiles that are located near the corner of the ceiling usually have different dimensions. You can use the measuring tape to get these dimensions and cut the faux tin drop in ceiling tiles to fit.

 

Installation Process

Step 1: You will not need to find the center of the room when you are installing faux tin drop in ceiling tiles. This is because you can use the outlay of the existing tile system as a guide. Simply install the first tile by pushing the ends into the creases of the existing grid system. Take care not to push too hard on the tile, but just gently enough to insert it over the existing tile.

Step 2: Repeat the same process described in Step 1 until you have completed all of the whole tiles and are left with the corners.

Step 3: The ‘cut-to-fit’ faux tin drop in ceiling tiles may need an adhesive to hold them tightly in place. This is because they will not be held from all four corners into the existing grid system. However, if you are able to cut the tiles to ensure a tight fit between the wall, then you may just dispense the adhesive.

Extra Tips:

Tip 1: Always remember that you should never use adhesive on the tile until you have tested it in the desired location.

Tip 2: Try combining different faux tin drop in ceiling tiles to create a checkered effect on the ceiling. However, choose colors that complement each other and most importantly that complement the room.

Tip 3: If you do decide to use different tiles, then ensure that the embossed designs complement each other as well.

Tip 4: If you do not wish to use adhesive on your faux tin drop in ceiling tiles, then you can use moldings at the corners of the ceiling. The moldings will push the rest of the tiles in place if they are not perfectly attached.

Main Advantages

Quick Installation: Installation period can range from a few hours or days depending on the size ceiling you are covering. The absence of adhesive is also an advantage since you won’t need to remove the existing tiles to “glue” them to the new tiles. This has a direct impact on the installation time involved.

Affordable: Faux drop in ceiling tiles are affordable and can keep your remodeling project within your budget range regardless of the number of ceilings you will cover.

Easy to Remove: They are easy to install and also easy to remove as well. You can use a small plastic knife to loosen the four corners and remove the tiles. This is a perfect option for someone that just wants to give their ceiling a quick “facelift” for a special event, but intend to use the old grid system afterwards.

 Waterproof
 Class A Fire Rated

 

Data Safety Sheets

 

Sound Test

 

Download Sound Absorption Test-1 (Made for ceiling tiles supplier decorativeceilingtiles.net)

Download Sound Absorption Test-1 (Made for ceiling tiles supplier decorativeceilingtiles.net)

 

PVC Ceiling Tiles Fire Certificate

 

Download Fire Rating Class “A” Certificate

Warranty Statement

Fine Art Deco, Inc. guarantees that your ceiling tiles will be free from manufacturing defects for a period of five years from the date of purchase.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. It covers only installations done in accordance with the installation and handling instructions available on this website. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or shade changes due to exposure to smoke, fumes, leaks, or abuse. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Please Note: Fine Art Deco, Inc. cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability / sag, or light reflectance will remain as stated if the tiles are painted. Painting will void this warranty & any certification(s). Painting will void UL approval for installation under fire suppression sprinkler systems.

Difference from Photos

This warranty does not cover differences between photographs and actual products purchased.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective parts, subject to inspection and approval by Fine Art Deco, Inc. The replacement materials will be of the same or similar design and quality.

PRO-SERIES CEILING TILES

Warranty Statement

The manufacturer of our Pro-Series tiles guarantees that your tiles will be free from manufacturing defects for a period of twenty-five (25) years from the date of purchase.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. It covers only installations done in accordance with the installation and handling instructions available on this website. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or environmental impacts such as sunlight or finish color changes due to exposure to smoke, fumes, leaks, abuse, or acts of God. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability/sag, or light reflectance will remain as stated if the tiles are painted.

Difference from Photos

This warranty does not cover differences between photographs and actual product purchased. We strongly recommend that all customers request and evaluate samples prior to purchase.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty (25 years from date of purchase), you will be supplied with new material to replace the defective parts, subject to inspection and approval by the manufacturer.

LED LIGHT PANELS

Warranty Statement

Fine Art Deco, Inc. guarantees that your LED Light Panels will be free from manufacturing defects for a period of five years from the date of purchase and preform as expected during that time.

Fine Art Deco, Inc. guarantees that your LED drivers will be free from manufacturing defects for a period of three years from the date of purchase and will operate within specifications.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. This warranty does not cover normal wear and tear or damage due to exposure to smoke, fumes, leaks, abuse, or acts of God. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

METAL & VINYL SUSPENSION SYSTEMS, CLIP ON GRID COVERS

Warranty Statement

The manufacturer of our Metal and Vinyl Suspension Systems and clip on grid covers guarantees the product(s) will be free from manufacturing defects for a period of twenty-five (25) years from the date of purchase.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or environmental impacts such as sunlight or finish color changes due to exposure to smoke, fumes, leaks, abuse, or acts of God. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability/sag, or light reflectance will remain as stated if the tiles are painted.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty (25 years from date of purchase), you will be supplied with new material to replace the defective parts, subject to inspection and approval by the manufacturer.

CEILING LINK GRID SYSTEM

Warranty Statement

The manufacturer of our Metal and Vinyl Suspension Systems and clip on grid covers guarantees the product(s) will be free from manufacturing defects for a period of five (5) years from the date of purchase.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or environmental impacts such as sunlight or finish color changes due to exposure to smoke, fumes, leaks, abuse, or acts of God. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability, or light reflectance will remain as stated if the grid is painted.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty (5 years from date of purchase), you will be supplied with new material to replace the defective parts, subject to inspection and approval by the manufacturer.

CEILING TILE TRIM MOLDING – Polyurethane Products

Warranty Statement

Fine Art Deco, Inc. provides a LIMITED LIFETIME WARRANTY to the original purchaser of our polyurethane products. This LIMITED LIFETIME WARRANTY provides that the polyurethane material will be free from manufacturer defects in material and workmanship under normal and expected use. This warranty does not encompass all of the products sold by Fine Art Deco, Inc. and is exclusive to our polyurethane products only. Other products may carry their own manufacturer’s warranty. Call us at 786-382-3205 for details.

Fine Art Deco, Inc. provides a LIMITED 5 YEAR WARRANTY to the original purchaser on the FINISH of our polyurethane products. This LIMITED WARRANTY provides that the FINISH on the polyurethane material will be free from finishing defects under normal and expected use for a period of five (5) years from the date of purchase. This warranty does not cover failure of a customer applied finishing system caused by material incompatibility.

  • Polyurethane products are for decorative use only
  • Primered products must be finished with an additional layer of finish paint. User is responsible to ensuring that the chosen finishing system is compatible with the primer/material.
  • Should be installed with non-corrosive fasteners and urethane approved adhesives in accordance with the installation instructions
  • Unprimed areas should not be exposed to UV light (sunlight)
  • Polyurethane products should not be installed in areas that experience ambient or surface temperatures above 140 degrees
  • Polyurethane products should be stored flat in normal ambient temperatures

If the material proves to be defective and has been installed and existed within the bounds of the above requirements, the customer should contact Fine Art Deco, Inc. in writing or by phone within 30 days of discovering the material defect. Fine Art Deco, Inc. may require digital images, a sample of the material or a combination of material and images to be sent to Fine Art Deco, Inc. for evaluation. Upon review of materials and installation methods, Fine Art Deco, Inc. will determine if replacement, repair or refund is appropriate. Fine Art Deco, Inc. is not liable for the cost of labor, transportation, or any other expenses incurred in conjunction with the purchase, use and installation of the material.

This limited warranty does not cover damage from the result of mishandling in transportation, acts of God, customer modifications, vandalism, misuse, abuse, improper maintenance, unreasonable care, or other causes that did not arise from manufacturer defects in workmanship and/or materials. No person or entity is authorized to change, modify, or amend the terms of this limited warranty in any manner.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty applies to our polyurethane based materials only.

Contact: Fine Art Deco, Inc.

Email: contact@fineartdeco.com

Telephone: 877-268-7770

Web: fineartdeco.com

WOOD TILES

Warranty Statement

Our Wood Ceiling Tiles are backed with a 3 year warranty which guards against fading, warping, or yellowing.

Warranty Limitations

This warranty does not cover problems caused by improper installation methods. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or environmental impacts such as sunlight or finish color changes due to exposure to smoke, fumes, leaks, abuse, or acts of God. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability/sag, or light reflectance will remain as stated if the tiles are painted.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective parts, subject to inspection and approval by Fine Art Deco, Inc. The replacement materials will be of the same or similar design and quality.

IMAGINATION TILES

Warranty Statement

Our Imagination Series Ceiling Tiles are backed with a 10 year warranty which guards against fading, warping, or yellowing.

Implied Warranties

There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.

Consequential or Incidental Damages

We exclude and will not pay any consequential or incidental damage, loss or expense.

Legal Rights

This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.

Defects

If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective parts, subject to inspection and approval by Fine Art Deco, Inc. The replacement materials will be of the same or similar design and quality.

DROP GRID CEILING FAN

Limited Warranty Statement

This Item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal use. Within the warranty period, we will repair or replace the product at our discretion. This warranty extends only to the original retail purchaser, and excludes any damage to the product resulting from accident or misuse. This product is not covered, when used in a commercial environment, for which it was not intended.

The above warranty is complete and exclusive. The warrantor expressly disclaims liability for any special, incidental, indirect, or consequential damages in connection with the purchase or use of this product or costs over the original purchase price.

Any implied warranties arising by operation of law shall be limited in duration to the terms of this warranty.
This warranty gives you specific legal rights and you may have other rights, which vary by jurisdiction.

TO MAKE A CLAIM

If you believe there is a defect in your material and want to make a claim under this warranty, please notify:

Fine Art Deco, Inc.

Email: contact@fineartdeco.com

Telephone: 877-268-7770

Web: fineartdeco.com